Professional Stainless Steel Wire Mesh Manufacturer and Stockist from China.
Feel free to call or email our senior sales.
+61 435 598 786
+86 158 0318 7372
hello@metartmesh.com+61 435 598 786
+86 158 0318 7372
hello@metartmesh.comMETART-WW17LW-Antique Copper Designer Wire Mesh
Raw Material: Stainless Steel Wires Grade 201, 304 and marine grade 316.
Type: Rigid Designer Wire Mesh
Opening Area: 40%
Estimated Square Meter Weight: Approx 6.1kg/㎡
Finish: Antique Copper Plated
Screen Width: Custom made.
Screen Length: Custom made.
The lightweight variation of pattern #WW17 is designated as METART WW17LW. An example of an aged copper-plated finish is shown here.
It is made of 1.8mm waved warp wire and 2.4x1.2mm grooved weft wire strips. Compared to WW17HW, the warp wires are less wavy. Additionally, the mesh is lighter than WW17HW due to the weft strip's lower density.
This vintage design of architectural mesh is frequently used in furniture door panels, closet door metal grilles, office screening, hotel lobby partition metal screens, living room metal screen separators, and wall cladding mesh panels.
Specification Table as Follow:
Raw Material |
Stainless Steel Wires Grade 201,304 or marine grade 316. |
Wire Mesh Type |
Rigid Designer Wire Mesh |
Round Wire Diameter (Single wire) |
1.8mm |
Flat Wire Strips (width x thickness): |
2.4x1.2mm |
Flat Wire Strip Pitch |
8mm |
Round Wire Hole Pitch |
12.5mm |
Overall thickness of the fabric |
3.3mm |
Opening Area |
40% |
Privacy Rate |
60% |
Estimated Square Meter Weight |
6.1kg/㎡ |
Finish |
Antique Copper Plated |
The way of cutting |
Straight Cut |
All optional ways of cut |
Straight Cut Only |
All optional Finishes |
Mill Finish ( Original stainless steel bright finish), |
Custom made specifications and Mini order accepted. |
|
Note: All the measurements including wire thickness, diameter, opening, and overall thickness are nominal numbers. The actual specification might have a tiny bit of tolerance according to fabrication |
PVD Plated Stainless Steel Architectural Wire Mesh Dia.2mm, Hole 7.2mm
METART-WW16–PVD Plated Decorative Wire Mesh
Lift Cabin Wall Cladding Architectural Stainless Steel Woven Wire Mesh Wire Strip:3x1.5mm, Wire Rod:1.45mm
Lift Cabin Cladding Architectural Stainless Steel Mesh-METART-WW04
Partition Screen Infill Architectural Wire Mesh Dia. before Flattened: 1.75mm, Aperture Size 3.5mm
METART-WW13-Hotel Partition Screen Infill Wire Mesh
©COPYRIGHT METART BUILDING TEC CO., LTD | ALL RIGHTS RESERVED | PRIVACY POLICY