hello@metartmesh.com +86 158 0318 7372 / +61 435 598 786

METART-WW37-Wall Cladding Designer Wire Mesh

Specification

Raw Material: SS201, SS304, SS316

Mesh Type: Rigid Architectural Cladding Mesh

Opening rate: 0%

Estimated Square Meter Weight: Approx 11.3kg/㎡

Finish: Mill Finish

Sheet Size: Custom made.

GET A QUOTE

Introduction

METART-WW37 rigid architectural cladding mesh is a versatile and durable designer wire mesh pattern suitable for a wide range of projects. It features two different types of warp wires, a group of double pre-crimped wires plus a big flat stainless steel strip, adding to its unique design and rigidity.

The METART-WW37 is available in three different stainless steel grades: SS201, SS304, and SS316. While SS201 is a cost-effective option, it is not recommended to be used in mill finish. It is better to be plated, such as PVD plated or copper plated, to enhance its appearance. SS304 is the most widely used material due to its chemical composition and properties, and SS316 is the best among the three grades. It is marine-grade, making it suitable for exterior architectural projects and decorations.

This wire mesh pattern is a great material for elevator wall cladding and other wall cladding projects. It is available in different finishes such as Antique Bronze plating, Antique Copper plating, Antique brass plate, PVD titanium plated, and Mill Finish. It is recommended to be plated to enhance its appearance and give it a color that makes the mesh look better.

The METART-WW37 ornamental cladding woven wire has an overall thickness of 4.5mm, with a weft wire rod diameter of 1.95mm, crimped warp wire diameter of 1.5mm, and crimped warp strips of 10x1mm. It has no opening at all, making it a 100% privacy wire mesh pattern that is ideal for cladding. The estimated square meter weight for this wire mesh is approx 11.3kg/㎡, making it sturdy enough for various applications.

Choose METART-WW37 woven wire mesh pattern for its unique design, durability, and versatility in various wall cladding projects. \

With different grades and finishes available, you can choose the one that best suits your project needs.

Specification Table.

Raw Material

SS201, SS304,SS316

Mesh Type

Rigid Architectural Cladding Mesh

Weft Wire Rod Diameter

1.95mm

Crimped Warp Wire Diameter

1.5mm

Crimped Warp Strips

10x1mm

Aperture Size:

0mm

Overall thickness of the fabric

4.5mm

Opening rate

0%

Privacy Rate

100%

Estimated Square Meter Weight

11.3kg/㎡

Finish

Stainless Steel Mill Finish

The way of cutting

Straight Cut

All optional ways of cut

Straight Cut

All optional Finishes

Mill Finish ( Original stainless steel bright finish),
Antique Bronze plating, Antique Copper plating, Antique brass plate, PVD titanium plated.

Custom made specifications and Mini order accepted.

Note:

All the measurements including wire thickness, diameter, opening, and overall thickness are nominal numbers. The actual specification might have a tiny bit of tolerance according to the fabrication

Application

GET A QUOTE

©COPYRIGHT METART BUILDING TEC CO., LTD  | ALL RIGHTS RESERVED | PRIVACY POLICY